NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
4GB DDR3 1066MHz ECC unbuffered DIMM with 2Rx8 rank for server upgrades
This 4GB DDR3 1066MHz PC3-8500 ECC UDIMM module uses a 2Rx8 unbuffered design with major brand chips. It operates at standard 1.5V voltage with CL7 latency. The 240-pin DIMM is built as a compatible equivalent for Hynix HMT351U7AFR8C-G7 and HMT351U7BFR8C-G7 modules. It targets administrators upgrading DDR3 server or workstation platforms that require error-correcting memory.
Running at the JEDEC standard 1.50V, the module draws typical DDR3 power without elevated voltage overhead. The unbuffered layout avoids the extra register components that increase consumption on registered DIMMs. No active cooling is included or specified, so airflow within the server chassis handles heat dissipation during normal multi-tasking workloads.
Every module undergoes quality assurance testing before shipment to verify reliable operation. The purchase includes a lifetime warranty against defects and access to United States-based technical support for compatibility questions before and after installation. No additional software, heat spreaders or mounting hardware are bundled with the memory stick.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the key in the 240-pin slot, press firmly until both side clips click shut, then verify in BIOS that the server detects 4 GB at 1066 MHz with ECC active.
No routine maintenance is required; if a correctable error count climbs or the module fails POST, replace it with another DDR3 1066 ECC UDIMM of matching voltage and rank.
The DDR3 1066 (PC3-8500) bandwidth ceiling is reached before thermal throttling, so sustained throughput tops out at the rated 8500 MT/s transfer rate.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?