Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 240-pin DDR3 UDIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1066 ECC UDIMM 2Rx8 Server RAM

SKU CH-BX32-8TZAP

4GB DDR3 1066MHz ECC unbuffered DIMM with 2Rx8 rank for server upgrades

  • Capacity4GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 4GB capacity adds headroom for virtualised workloads
  • DDR3 1066 MHz PC3-8500 speed matches legacy server specs
  • ECC unbuffered design detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation improves memory controller efficiency
  • 50 V standard voltage keeps power draw predictable

4GB DDR3 ECC UDIMM for Servers

This 4GB DDR3 1066MHz PC3-8500 ECC UDIMM module uses a 2Rx8 unbuffered design with major brand chips. It operates at standard 1.5V voltage with CL7 latency. The 240-pin DIMM is built as a compatible equivalent for Hynix HMT351U7AFR8C-G7 and HMT351U7BFR8C-G7 modules. It targets administrators upgrading DDR3 server or workstation platforms that require error-correcting memory.

Thermals and Power at Standard Voltage

Running at the JEDEC standard 1.50V, the module draws typical DDR3 power without elevated voltage overhead. The unbuffered layout avoids the extra register components that increase consumption on registered DIMMs. No active cooling is included or specified, so airflow within the server chassis handles heat dissipation during normal multi-tasking workloads.

Quality Assurance and Support Inclusions

Every module undergoes quality assurance testing before shipment to verify reliable operation. The purchase includes a lifetime warranty against defects and access to United States-based technical support for compatibility questions before and after installation. No additional software, heat spreaders or mounting hardware are bundled with the memory stick.

Kohokohdat

  • 4GB capacity adds headroom for virtualised workloads
  • DDR3 1066 MHz PC3-8500 speed matches legacy server specs
  • ECC unbuffered design detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation improves memory controller efficiency
  • 50 V standard voltage keeps power draw predictable

Tekniset tiedot

BrandA-Tech
Capacity4GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Kysymyksiä tästä tuotteesta

How do I install this 240-pin DDR3 UDIMM and what step do people often miss?

Align the notch on the module with the key in the 240-pin slot, press firmly until both side clips click shut, then verify in BIOS that the server detects 4 GB at 1066 MHz with ECC active.

What maintenance or replacement will this ECC UDIMM need over time?

No routine maintenance is required; if a correctable error count climbs or the module fails POST, replace it with another DDR3 1066 ECC UDIMM of matching voltage and rank.

What limit appears first when this 1.5 V module runs under sustained load?

The DDR3 1066 (PC3-8500) bandwidth ceiling is reached before thermal throttling, so sustained throughput tops out at the rated 8500 MT/s transfer rate.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.