NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
4GB DDR3 1066MHz ECC unbuffered DIMM with 2Rx8 rank for server upgrades
This 4GB DDR3 1066MHz PC3-8500 ECC UDIMM module uses a 2Rx8 unbuffered design with major brand chips. It operates at standard 1.5V voltage with CL7 latency. The 240-pin DIMM is built as a compatible equivalent for Hynix HMT351U7AFR8C-G7 and HMT351U7BFR8C-G7 modules. It targets administrators upgrading DDR3 server or workstation platforms that require error-correcting memory.
Running at the JEDEC standard 1.50V, the module draws typical DDR3 power without elevated voltage overhead. The unbuffered layout avoids the extra register components that increase consumption on registered DIMMs. No active cooling is included or specified, so airflow within the server chassis handles heat dissipation during normal multi-tasking workloads.
Every module undergoes quality assurance testing before shipment to verify reliable operation. The purchase includes a lifetime warranty against defects and access to United States-based technical support for compatibility questions before and after installation. No additional software, heat spreaders or mounting hardware are bundled with the memory stick.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Align the notch on the module with the key in the 240-pin slot, press firmly until both side clips click shut, then verify in BIOS that the server detects 4 GB at 1066 MHz with ECC active.
No routine maintenance is required; if a correctable error count climbs or the module fails POST, replace it with another DDR3 1066 ECC UDIMM of matching voltage and rank.
The DDR3 1066 (PC3-8500) bandwidth ceiling is reached before thermal throttling, so sustained throughput tops out at the rated 8500 MT/s transfer rate.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?