Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips and gold edge connectors, 240-pin DIMM form factor

A-Tech

A-Tech 4GB DDR3 1600 Desktop RAM

SKU CH-8V8M-S7PMY

A 4GB DDR3 1600 desktop module replaces HP part numbers 655410-150, 655410-571, B1S53AA and B4U36AA

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 4GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed improves data transfer rates
  • CL11 latency supports responsive system operation
  • 5V standard voltage ensures broad desktop compatibility
  • 240-pin DIMM form factor fits standard DDR3 slots

A-Tech 4GB DDR3 1600 DIMM

This A-Tech module is a 4GB DDR3 1600 desktop DIMM built for system memory upgrades. It runs at the standard 1.50V with CL11 timing and uses unbuffered, non-ECC architecture. The 240-pin form factor fits mainstream desktop motherboards that support DDR3. Major brand chips are used throughout for consistent reliability.

Suitable for compatible HP desktops

The part matches HP numbers 655410-150, 655410-571, B1S53AA and B4U36AA, making it a direct replacement for those configurations. It also works in AMD and Intel platforms that accept DDR3 1600 unbuffered DIMMs. Systems requiring ECC, registered modules, or a different DDR generation cannot use this memory.

The deciding specification is DDR3 1600 unbuffered

Your motherboard must support DDR3 at 1600 MT/s (PC3-12800) with 1.50V unbuffered DIMMs. If the board calls for ECC, registered, or a different voltage or generation, this module will not be compatible. Always verify the supported memory specification before ordering.

Priekšrocības

  • 4GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed improves data transfer rates
  • CL11 latency supports responsive system operation
  • 5V standard voltage ensures broad desktop compatibility
  • 240-pin DIMM form factor fits standard DDR3 slots

Specifikācijas

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Jautājumi par šo preci

Will this module fit a motherboard that needs a 240-pin DDR3 DIMM?

Yes, the module is a 240-pin DDR3 DIMM, the standard form factor for desktop DDR3 memory slots.

Does the 1.5 V operating voltage match the standard DDR3 specification?

Yes, 1.5 V is the standard DDR3 voltage, so it will work with any desktop board that follows the DDR3 specification.

Can I use this stick alongside an existing CL11 DDR3-1600 module?

Yes, matching the 1600 MHz speed and CL11 latency allows the two modules to run together at their rated settings.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.