Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green printed circuit board with black memory chips and gold edge connectors, 240-pin DIMM form factor

A-Tech

A-Tech 4GB DDR3 1600 Desktop RAM

SKU CH-8V8M-S7PMY

A 4GB DDR3 1600 desktop module replaces HP part numbers 655410-150, 655410-571, B1S53AA and B4U36AA

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 4GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed improves data transfer rates
  • CL11 latency supports responsive system operation
  • 5V standard voltage ensures broad desktop compatibility
  • 240-pin DIMM form factor fits standard DDR3 slots

A-Tech 4GB DDR3 1600 DIMM

This A-Tech module is a 4GB DDR3 1600 desktop DIMM built for system memory upgrades. It runs at the standard 1.50V with CL11 timing and uses unbuffered, non-ECC architecture. The 240-pin form factor fits mainstream desktop motherboards that support DDR3. Major brand chips are used throughout for consistent reliability.

Suitable for compatible HP desktops

The part matches HP numbers 655410-150, 655410-571, B1S53AA and B4U36AA, making it a direct replacement for those configurations. It also works in AMD and Intel platforms that accept DDR3 1600 unbuffered DIMMs. Systems requiring ECC, registered modules, or a different DDR generation cannot use this memory.

The deciding specification is DDR3 1600 unbuffered

Your motherboard must support DDR3 at 1600 MT/s (PC3-12800) with 1.50V unbuffered DIMMs. If the board calls for ECC, registered, or a different voltage or generation, this module will not be compatible. Always verify the supported memory specification before ordering.

Poudarki

  • 4GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed improves data transfer rates
  • CL11 latency supports responsive system operation
  • 5V standard voltage ensures broad desktop compatibility
  • 240-pin DIMM form factor fits standard DDR3 slots

Specifikacije

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Vprašanja o tem izdelku

Will this module fit a motherboard that needs a 240-pin DDR3 DIMM?

Yes, the module is a 240-pin DDR3 DIMM, the standard form factor for desktop DDR3 memory slots.

Does the 1.5 V operating voltage match the standard DDR3 specification?

Yes, 1.5 V is the standard DDR3 voltage, so it will work with any desktop board that follows the DDR3 specification.

Can I use this stick alongside an existing CL11 DDR3-1600 module?

Yes, matching the 1600 MHz speed and CL11 latency allows the two modules to run together at their rated settings.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.