Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips and gold edge connectors, 240-pin DIMM form factor

A-Tech

A-Tech 4GB DDR3 1600 Desktop RAM

SKU CH-8V8M-S7PMY

A 4GB DDR3 1600 desktop module replaces HP part numbers 655410-150, 655410-571, B1S53AA and B4U36AA

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 4GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed improves data transfer rates
  • CL11 latency supports responsive system operation
  • 5V standard voltage ensures broad desktop compatibility
  • 240-pin DIMM form factor fits standard DDR3 slots

A-Tech 4GB DDR3 1600 DIMM

This A-Tech module is a 4GB DDR3 1600 desktop DIMM built for system memory upgrades. It runs at the standard 1.50V with CL11 timing and uses unbuffered, non-ECC architecture. The 240-pin form factor fits mainstream desktop motherboards that support DDR3. Major brand chips are used throughout for consistent reliability.

Suitable for compatible HP desktops

The part matches HP numbers 655410-150, 655410-571, B1S53AA and B4U36AA, making it a direct replacement for those configurations. It also works in AMD and Intel platforms that accept DDR3 1600 unbuffered DIMMs. Systems requiring ECC, registered modules, or a different DDR generation cannot use this memory.

The deciding specification is DDR3 1600 unbuffered

Your motherboard must support DDR3 at 1600 MT/s (PC3-12800) with 1.50V unbuffered DIMMs. If the board calls for ECC, registered, or a different voltage or generation, this module will not be compatible. Always verify the supported memory specification before ordering.

Helstu kostir

  • 4GB capacity lets you run more programs simultaneously
  • DDR3 1600MHz speed improves data transfer rates
  • CL11 latency supports responsive system operation
  • 5V standard voltage ensures broad desktop compatibility
  • 240-pin DIMM form factor fits standard DDR3 slots

Tæknilýsing

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Spurningar um þessa vöru

Will this module fit a motherboard that needs a 240-pin DDR3 DIMM?

Yes, the module is a 240-pin DDR3 DIMM, the standard form factor for desktop DDR3 memory slots.

Does the 1.5 V operating voltage match the standard DDR3 specification?

Yes, 1.5 V is the standard DDR3 voltage, so it will work with any desktop board that follows the DDR3 specification.

Can I use this stick alongside an existing CL11 DDR3-1600 module?

Yes, matching the 1600 MHz speed and CL11 latency allows the two modules to run together at their rated settings.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.