Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR3 module with gold contacts and black chips

A-Tech

A-Tech 4GB DDR3 1866 ECC UDIMM 1Rx8 1.5V CL13 240-Pin Server RAM

SKU CH-F18Q-PFGDE

4GB DDR3 1866 ECC UDIMM with CL13 latency and 1.5V operation for compatible servers and workstations

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

  • ECC protection safeguards data integrity in servers
  • Unbuffered DDR3 1866 MHz module runs at CL13 latency
  • Single-rank 1Rx8 layout keeps signal loading low
  • Standard 1.5 V operation matches DDR3 platform specs
  • 240-pin UDIMM form factor fits compatible server boards

Server Memory Module

This A-Tech module provides 4GB of DDR3 1866 ECC unbuffered memory for compatible servers and workstations. It uses a 240-pin DIMM form factor with a single rank x8 organisation and operates at 1.5V. The CL13 latency and PC3-14900E rating suit systems designed for this specification.

Target Systems and Limits

This module suits administrators upgrading DDR3 servers or workstations that require ECC unbuffered DIMMs. It will not work in desktop or laptop computers, nor in platforms that need registered or load-reduced memory. Buyers needing larger capacities or higher speeds must verify their platform supports such configurations.

Deciding Specification

The DDR3 1866 ECC unbuffered 240-pin interface is the single specification that determines compatibility. Only systems explicitly qualified for DDR3 ECC UDIMM at this speed and voltage will accept the module. Confirm the memory type, ECC support, and pin count in your hardware documentation before ordering.

Priekšrocības

  • ECC protection safeguards data integrity in servers
  • Unbuffered DDR3 1866 MHz module runs at CL13 latency
  • Single-rank 1Rx8 layout keeps signal loading low
  • Standard 1.5 V operation matches DDR3 platform specs
  • 240-pin UDIMM form factor fits compatible server boards

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-14900E
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Should I choose a single-rank x8 module or a dual-rank option for my server?

This module is a single-rank x8 (1Rx8) design, which places less electrical load on the memory controller and often allows higher total capacities per channel in DDR3 servers.

What real-world throughput can I expect from the DDR3 1866 rating once installed?

At 1866 MT/s the module runs at the PC3-14900 data rate, so peak bandwidth scales directly with that clock speed in your server's memory subsystem.

Does the 240-pin ECC UDIMM interface limit the maximum speed I can run?

The 240-pin unbuffered ECC DIMM form factor is specified for DDR3 1866 at 1.5 V with CL13 latency, and the memory controller will not exceed that standard rate.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.