Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Green rectangular DDR3 module with gold contacts and black chips

A-Tech

A-Tech 4GB DDR3 1866 ECC UDIMM 1Rx8 1.5V CL13 240-Pin Server RAM

SKU CH-F18Q-PFGDE

4GB DDR3 1866 ECC UDIMM with CL13 latency and 1.5V operation for compatible servers and workstations

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

  • ECC protection safeguards data integrity in servers
  • Unbuffered DDR3 1866 MHz module runs at CL13 latency
  • Single-rank 1Rx8 layout keeps signal loading low
  • Standard 1.5 V operation matches DDR3 platform specs
  • 240-pin UDIMM form factor fits compatible server boards

Server Memory Module

This A-Tech module provides 4GB of DDR3 1866 ECC unbuffered memory for compatible servers and workstations. It uses a 240-pin DIMM form factor with a single rank x8 organisation and operates at 1.5V. The CL13 latency and PC3-14900E rating suit systems designed for this specification.

Target Systems and Limits

This module suits administrators upgrading DDR3 servers or workstations that require ECC unbuffered DIMMs. It will not work in desktop or laptop computers, nor in platforms that need registered or load-reduced memory. Buyers needing larger capacities or higher speeds must verify their platform supports such configurations.

Deciding Specification

The DDR3 1866 ECC unbuffered 240-pin interface is the single specification that determines compatibility. Only systems explicitly qualified for DDR3 ECC UDIMM at this speed and voltage will accept the module. Confirm the memory type, ECC support, and pin count in your hardware documentation before ordering.

Poudarki

  • ECC protection safeguards data integrity in servers
  • Unbuffered DDR3 1866 MHz module runs at CL13 latency
  • Single-rank 1Rx8 layout keeps signal loading low
  • Standard 1.5 V operation matches DDR3 platform specs
  • 240-pin UDIMM form factor fits compatible server boards

Specifikacije

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-14900E
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

Should I choose a single-rank x8 module or a dual-rank option for my server?

This module is a single-rank x8 (1Rx8) design, which places less electrical load on the memory controller and often allows higher total capacities per channel in DDR3 servers.

What real-world throughput can I expect from the DDR3 1866 rating once installed?

At 1866 MT/s the module runs at the PC3-14900 data rate, so peak bandwidth scales directly with that clock speed in your server's memory subsystem.

Does the 240-pin ECC UDIMM interface limit the maximum speed I can run?

The 240-pin unbuffered ECC DIMM form factor is specified for DDR3 1866 at 1.5 V with CL13 latency, and the memory controller will not exceed that standard rate.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.