Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge contacts and black memory chips, no heat spreader

A-Tech

A-Tech 4GB DDR4 2133 CL15 Desktop RAM

SKU CH-3B7F-0GTRN

4GB DDR4 2133 CL15 desktop module at 1.2V for G.Skill F4-2133C15D-8GVR replacement

  • Capacity4GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 4GB capacity lets you run more apps simultaneously
  • DDR4 2133MHz speed delivers fast data transfer rates
  • CL15 latency provides responsive memory performance
  • 2V operation reduces power consumption and heat
  • 288-pin DIMM fits standard desktop motherboard slots

4GB DDR4 2133 Desktop Module

This 4GB DDR4 2133 CL15 DIMM is built as a compatible replacement for G.Skill F4-2133C15D-8GVR kits. It runs at 2133 MHz with standard 1.20 V operation. The unbuffered non-ECC design fits typical consumer desktop boards. A-Tech tests every module before it ships.

Suits Single-Slot Upgrades

The single 4GB stick works well for a basic capacity bump on a board with a free 288-pin slot. Users needing dual-channel bandwidth or 8GB and up should look at a matched kit instead. Systems that require registered or ECC memory cannot use this module.

CL15 CAS Latency at 2133 MHz

The CL15 timing at 2133 MHz sets the access speed for this module. If your platform demands tighter latency or a higher data rate this part will not meet that requirement. Verify the motherboard qualification list before ordering.

Priekšrocības

  • 4GB capacity lets you run more apps simultaneously
  • DDR4 2133MHz speed delivers fast data transfer rates
  • CL15 latency provides responsive memory performance
  • 2V operation reduces power consumption and heat
  • 288-pin DIMM fits standard desktop motherboard slots

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF4-2133C15D-8GVR
Capacity4GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF4-2133C15D-8GVR
Recommend UseCompatible Replacement for G.Skill F4-2133C15D-8GVR

Jautājumi par šo preci

Should I pick the 4GB single module or look for a larger kit?

This listing is a single 4GB DDR4 2133 CL15 DIMM. Add one module if your board has a free slot and you only need a small capacity boost; choose a matched kit of two or more modules if you want dual-channel bandwidth or a higher total capacity.

What does the 2133 MHz rating actually deliver in my desktop?

The module runs at 2133 MHz with CL15 latency at the standard 1.20 V. In a real system it will operate at the highest speed your motherboard and CPU memory controller both support, which may be 2133 MHz or a lower JEDEC frequency if the platform cannot run that fast.

Will the 288-pin DDR4 DIMM fit my motherboard's memory slots?

Yes — the stick uses the standard 288-pin DDR4 DIMM form factor (PC4-17000) and is unbuffered non-ECC, so it fits any desktop board with DDR4 slots that accept 1.20 V UDIMMs.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.