NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
A-Tech
4GB DDR4 2133 CL15 desktop module at 1.2V for G.Skill F4-2133C15D-8GVR replacement
This 4GB DDR4 2133 CL15 DIMM is built as a compatible replacement for G.Skill F4-2133C15D-8GVR kits. It runs at 2133 MHz with standard 1.20 V operation. The unbuffered non-ECC design fits typical consumer desktop boards. A-Tech tests every module before it ships.
The single 4GB stick works well for a basic capacity bump on a board with a free 288-pin slot. Users needing dual-channel bandwidth or 8GB and up should look at a matched kit instead. Systems that require registered or ECC memory cannot use this module.
The CL15 timing at 2133 MHz sets the access speed for this module. If your platform demands tighter latency or a higher data rate this part will not meet that requirement. Verify the motherboard qualification list before ordering.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F4-2133C15D-8GVR |
| Capacity | 4GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F4-2133C15D-8GVR |
| Recommend Use | Compatible Replacement for G.Skill F4-2133C15D-8GVR |
This listing is a single 4GB DDR4 2133 CL15 DIMM. Add one module if your board has a free slot and you only need a small capacity boost; choose a matched kit of two or more modules if you want dual-channel bandwidth or a higher total capacity.
The module runs at 2133 MHz with CL15 latency at the standard 1.20 V. In a real system it will operate at the highest speed your motherboard and CPU memory controller both support, which may be 2133 MHz or a lower JEDEC frequency if the platform cannot run that fast.
Yes — the stick uses the standard 288-pin DDR4 DIMM form factor (PC4-17000) and is unbuffered non-ECC, so it fits any desktop board with DDR4 slots that accept 1.20 V UDIMMs.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?