NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
64 GB DDR4 3200 ECC RDIMM module with 2Rx4 registered design and CL22 latency for server workloads
This 64GB DDR4 3200MHz module is built for servers and workstations that require error-correcting registered memory. It delivers 64GB capacity in a single 288-pin DIMM running at 1.20V with CL22 latency. The 2Rx4 organisation suits high-density configurations where data integrity is critical.
Registered buffering reduces electrical load on the memory controller, allowing larger memory arrays in multi-socket platforms. Major brand DRAM chips are used throughout and every module undergoes quality assurance testing for dependable operation. The standard DDR4 1.2V voltage ensures compatibility with existing DDR4 server power delivery.
Confirm that your motherboard accepts DDR4 registered ECC DIMMs and supports 3200MHz speeds at the required voltage. Systems limited to unbuffered UDIMMs or earlier DDR generations cannot use this module. Check the qualified vendor list or manual for maximum capacity per slot and total system limits.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 3200 MT/s with CL22 timing at 1.20 V, delivering PC4-25600 bandwidth when the platform supports that speed.
It requires a standard DDR4 288-pin DIMM slot; the registered design adds a buffer chip, so verify the motherboard supports RDIMM and has enough height clearance.
Power off the system, align the notch with the slot key, press firmly until both latches click, then enable ECC in the BIOS — skipping the BIOS step leaves error correction inactive.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?