NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
A-Tech
64 GB DDR4 3200 ECC RDIMM module with 2Rx4 registered design and CL22 latency for server workloads
This 64GB DDR4 3200MHz module is built for servers and workstations that require error-correcting registered memory. It delivers 64GB capacity in a single 288-pin DIMM running at 1.20V with CL22 latency. The 2Rx4 organisation suits high-density configurations where data integrity is critical.
Registered buffering reduces electrical load on the memory controller, allowing larger memory arrays in multi-socket platforms. Major brand DRAM chips are used throughout and every module undergoes quality assurance testing for dependable operation. The standard DDR4 1.2V voltage ensures compatibility with existing DDR4 server power delivery.
Confirm that your motherboard accepts DDR4 registered ECC DIMMs and supports 3200MHz speeds at the required voltage. Systems limited to unbuffered UDIMMs or earlier DDR generations cannot use this module. Check the qualified vendor list or manual for maximum capacity per slot and total system limits.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 3200 MT/s with CL22 timing at 1.20 V, delivering PC4-25600 bandwidth when the platform supports that speed.
It requires a standard DDR4 288-pin DIMM slot; the registered design adds a buffer chip, so verify the motherboard supports RDIMM and has enough height clearance.
Power off the system, align the notch with the slot key, press firmly until both latches click, then enable ECC in the BIOS — skipping the BIOS step leaves error correction inactive.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?