Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR3 DIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-J0M9-5R1NA

ECC registered DDR3 DIMM with 8 GB capacity, 1600 MHz speed and CL11 latency for server workloads

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom
  • DDR3 1600MHz PC3-12800 speed supports demanding workloads
  • ECC RDIMM registered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 50V standard voltage ensures broad platform compatibility

8GB DDR3 1600MHz ECC RDIMM Server Memory

This 8GB DDR3 module runs at 1600MHz with CL11 latency and 1.5V operation. It uses a 240-pin DIMM form factor and features ECC registered 2Rx8 architecture for server reliability.

Suits servers and workstations needing registered

Systems that require unbuffered non-ECC DDR3 or a different DDR generation cannot use this module. Buyers without a compatible 240-pin registered memory slot should look elsewhere.

Registered ECC 2Rx8 configuration decides

The module is a registered ECC DIMM with 2Rx8 organisation, so the motherboard must support registered error-correcting memory. Verify your platform accepts this exact configuration before ordering.

Priekšrocības

  • 8GB capacity expands server memory headroom
  • DDR3 1600MHz PC3-12800 speed supports demanding workloads
  • ECC RDIMM registered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 50V standard voltage ensures broad platform compatibility

Specifikācijas

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Jautājumi par šo preci

How do I install this 240-pin DDR3 ECC RDIMM and what step is often missed?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then power on and verify the full 8 GB appears in BIOS or system firmware.

What maintenance or replacement will this registered ECC module need over its service life?

No routine maintenance is required; the module either continues operating or develops correctable/uncorrectable errors that the platform logs, at which point the 8 GB stick is replaced as a unit.

What limit appears first when this CL11 1.50 V DDR3-1600 kit runs sustained workloads?

The memory controller's maximum supported frequency and voltage ceiling — 1600 MT/s at 1.50 V — caps throughput before the module's own timing or thermal limits are reached.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.