Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR3 DIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-J0M9-5R1NA

ECC registered DDR3 DIMM with 8 GB capacity, 1600 MHz speed and CL11 latency for server workloads

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom
  • DDR3 1600MHz PC3-12800 speed supports demanding workloads
  • ECC RDIMM registered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 50V standard voltage ensures broad platform compatibility

8GB DDR3 1600MHz ECC RDIMM Server Memory

This 8GB DDR3 module runs at 1600MHz with CL11 latency and 1.5V operation. It uses a 240-pin DIMM form factor and features ECC registered 2Rx8 architecture for server reliability.

Suits servers and workstations needing registered

Systems that require unbuffered non-ECC DDR3 or a different DDR generation cannot use this module. Buyers without a compatible 240-pin registered memory slot should look elsewhere.

Registered ECC 2Rx8 configuration decides

The module is a registered ECC DIMM with 2Rx8 organisation, so the motherboard must support registered error-correcting memory. Verify your platform accepts this exact configuration before ordering.

Pluspunten

  • 8GB capacity expands server memory headroom
  • DDR3 1600MHz PC3-12800 speed supports demanding workloads
  • ECC RDIMM registered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 50V standard voltage ensures broad platform compatibility

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

How do I install this 240-pin DDR3 ECC RDIMM and what step is often missed?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then power on and verify the full 8 GB appears in BIOS or system firmware.

What maintenance or replacement will this registered ECC module need over its service life?

No routine maintenance is required; the module either continues operating or develops correctable/uncorrectable errors that the platform logs, at which point the 8 GB stick is replaced as a unit.

What limit appears first when this CL11 1.50 V DDR3-1600 kit runs sustained workloads?

The memory controller's maximum supported frequency and voltage ceiling — 1600 MT/s at 1.50 V — caps throughput before the module's own timing or thermal limits are reached.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.