Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular DDR3 DIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-J0M9-5R1NA

ECC registered DDR3 DIMM with 8 GB capacity, 1600 MHz speed and CL11 latency for server workloads

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom
  • DDR3 1600MHz PC3-12800 speed supports demanding workloads
  • ECC RDIMM registered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 50V standard voltage ensures broad platform compatibility

8GB DDR3 1600MHz ECC RDIMM Server Memory

This 8GB DDR3 module runs at 1600MHz with CL11 latency and 1.5V operation. It uses a 240-pin DIMM form factor and features ECC registered 2Rx8 architecture for server reliability.

Suits servers and workstations needing registered

Systems that require unbuffered non-ECC DDR3 or a different DDR generation cannot use this module. Buyers without a compatible 240-pin registered memory slot should look elsewhere.

Registered ECC 2Rx8 configuration decides

The module is a registered ECC DIMM with 2Rx8 organisation, so the motherboard must support registered error-correcting memory. Verify your platform accepts this exact configuration before ordering.

Punti di forza

  • 8GB capacity expands server memory headroom
  • DDR3 1600MHz PC3-12800 speed supports demanding workloads
  • ECC RDIMM registered design protects data integrity
  • 2Rx8 dual-rank organisation increases memory density
  • 50V standard voltage ensures broad platform compatibility

Caratteristiche tecniche

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Domande su questo articolo

How do I install this 240-pin DDR3 ECC RDIMM and what step is often missed?

Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then power on and verify the full 8 GB appears in BIOS or system firmware.

What maintenance or replacement will this registered ECC module need over its service life?

No routine maintenance is required; the module either continues operating or develops correctable/uncorrectable errors that the platform logs, at which point the 8 GB stick is replaced as a unit.

What limit appears first when this CL11 1.50 V DDR3-1600 kit runs sustained workloads?

The memory controller's maximum supported frequency and voltage ceiling — 1600 MT/s at 1.50 V — caps throughput before the module's own timing or thermal limits are reached.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.