SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00502075BTC
Krājumā
A-Tech
A-Tech 8GB DDR3 1866MHz ECC UDIMM 2Rx8 for Hynix HMT41GU7AFR8C-RD HMT41GU7BFR8C-RD Server Memory
8GB DDR3 1866MHz ECC UDIMM server memory with CL13 latency and 1.50V operation for compatible Hynix systems
- Capacity8GB
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- Voltage1.50V
- ECCYes
- Buffered/RegisteredUnbuffered
- 8 GB capacity expands server memory headroom
- 1866 MHz DDR3 speed accelerates data throughput
- ECC UDIMM detects and corrects single-bit errors
- 2Rx8 dual-rank organisation improves memory density
- 50 V standard voltage ensures broad platform compatibility
8GB ECC UDIMM for servers
This A-Tech module provides 8GB of DDR3 1866MHz memory with ECC error correction. It uses a 240-pin unbuffered DIMM form factor and runs at the standard 1.50V voltage. The stick is built as a direct replacement for Hynix HMT41GU7AFR8C-RD and HMT41GU7BFR8C-RD parts.
CL13 latency and 2Rx8 layout
The CAS latency is rated at CL13 and the chips are arranged in a dual-rank 2Rx8 configuration. These timings suit server and workstation boards that support DDR3 ECC UDIMMs at this speed. Systems requiring registered DIMMs or a different voltage will not be compatible.
PC3-14900 speed rating
The module operates at the PC3-14900 data rate, which is the single specification that confirms whether your platform can use this memory. Check your motherboard or system documentation for DDR3 1866MHz ECC UDIMM support before ordering.
Priekšrocības
- 8 GB capacity expands server memory headroom
- 1866 MHz DDR3 speed accelerates data throughput
- ECC UDIMM detects and corrects single-bit errors
- 2Rx8 dual-rank organisation improves memory density
- 50 V standard voltage ensures broad platform compatibility
Specifikācijas
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Jautājumi par šo preci
Will the 2Rx8 ECC chips need replacement under normal server workloads?
The module uses major-brand chips tested to A-Tech quality standards and carries a lifetime warranty, so no chip-level replacement is expected during its service life.
What limits sustained throughput on this DDR3-1866 CL13 stick?
The CL13 latency at 1866 MHz sets the timing ceiling, so sustained bandwidth tops out at the PC3-14900 rating.
How much heat and power does the 1.50 V unbuffered DIMM produce all day?
At standard 1.50 V DDR3 voltage the 8 GB UDIMM runs within normal thermal limits for 240-pin server slots, requiring only typical chassis airflow.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
