Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 240-pin DDR3 DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR3 1866MHz ECC UDIMM 2Rx8 for Hynix HMT41GU7AFR8C-RD HMT41GU7BFR8C-RD Server Memory

SKU CH-F4RD-V7JNB

8GB DDR3 1866MHz ECC UDIMM server memory with CL13 latency and 1.50V operation for compatible Hynix systems

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8 GB capacity expands server memory headroom
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC UDIMM detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation improves memory density
  • 50 V standard voltage ensures broad platform compatibility

8GB ECC UDIMM for servers

This A-Tech module provides 8GB of DDR3 1866MHz memory with ECC error correction. It uses a 240-pin unbuffered DIMM form factor and runs at the standard 1.50V voltage. The stick is built as a direct replacement for Hynix HMT41GU7AFR8C-RD and HMT41GU7BFR8C-RD parts.

CL13 latency and 2Rx8 layout

The CAS latency is rated at CL13 and the chips are arranged in a dual-rank 2Rx8 configuration. These timings suit server and workstation boards that support DDR3 ECC UDIMMs at this speed. Systems requiring registered DIMMs or a different voltage will not be compatible.

PC3-14900 speed rating

The module operates at the PC3-14900 data rate, which is the single specification that confirms whether your platform can use this memory. Check your motherboard or system documentation for DDR3 1866MHz ECC UDIMM support before ordering.

Přednosti

  • 8 GB capacity expands server memory headroom
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC UDIMM detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation improves memory density
  • 50 V standard voltage ensures broad platform compatibility

Specifikace

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

Will the 2Rx8 ECC chips need replacement under normal server workloads?

The module uses major-brand chips tested to A-Tech quality standards and carries a lifetime warranty, so no chip-level replacement is expected during its service life.

What limits sustained throughput on this DDR3-1866 CL13 stick?

The CL13 latency at 1866 MHz sets the timing ceiling, so sustained bandwidth tops out at the PC3-14900 rating.

How much heat and power does the 1.50 V unbuffered DIMM produce all day?

At standard 1.50 V DDR3 voltage the 8 GB UDIMM runs within normal thermal limits for 240-pin server slots, requiring only typical chassis airflow.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.