Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

A-Tech

A-Tech 8GB DDR3 1866MHz ECC UDIMM 2Rx8 for Hynix HMT41GU7AFR8C-RD HMT41GU7BFR8C-RD Server Memory

SKU CH-F4RD-V7JNB

8GB DDR3 1866MHz ECC UDIMM server memory with CL13 latency and 1.50V operation for compatible Hynix systems

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8 GB capacity expands server memory headroom
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC UDIMM detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation improves memory density
  • 50 V standard voltage ensures broad platform compatibility

8GB ECC UDIMM for servers

This A-Tech module provides 8GB of DDR3 1866MHz memory with ECC error correction. It uses a 240-pin unbuffered DIMM form factor and runs at the standard 1.50V voltage. The stick is built as a direct replacement for Hynix HMT41GU7AFR8C-RD and HMT41GU7BFR8C-RD parts.

CL13 latency and 2Rx8 layout

The CAS latency is rated at CL13 and the chips are arranged in a dual-rank 2Rx8 configuration. These timings suit server and workstation boards that support DDR3 ECC UDIMMs at this speed. Systems requiring registered DIMMs or a different voltage will not be compatible.

PC3-14900 speed rating

The module operates at the PC3-14900 data rate, which is the single specification that confirms whether your platform can use this memory. Check your motherboard or system documentation for DDR3 1866MHz ECC UDIMM support before ordering.

Najważniejsze cechy

  • 8 GB capacity expands server memory headroom
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC UDIMM detects and corrects single-bit errors
  • 2Rx8 dual-rank organisation improves memory density
  • 50 V standard voltage ensures broad platform compatibility

Specyfikacja

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Pytania dotyczące tego produktu

Will the 2Rx8 ECC chips need replacement under normal server workloads?

The module uses major-brand chips tested to A-Tech quality standards and carries a lifetime warranty, so no chip-level replacement is expected during its service life.

What limits sustained throughput on this DDR3-1866 CL13 stick?

The CL13 latency at 1866 MHz sets the timing ceiling, so sustained bandwidth tops out at the PC3-14900 rating.

How much heat and power does the 1.50 V unbuffered DIMM produce all day?

At standard 1.50 V DDR3 voltage the 8 GB UDIMM runs within normal thermal limits for 240-pin server slots, requiring only typical chassis airflow.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.