NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
An 8 GB DDR3L 1600 MHz ECC registered DIMM for server and workstation upgrades
This A-Tech module delivers 8 GB of DDR3L 1600 memory in a registered DIMM format designed for server and workstation platforms. It operates at 1.35 V low voltage with CL11 latency and uses Samsung chipset components. The stick is a direct compatible replacement for Samsung M392B1G70DB0-YK0.
The single specification that decides fit is the registered ECC design with 1Rx4 rank configuration on a 240-pin DDR3L interface. Systems requiring unbuffered non-ECC DIMMs or a different rank layout will not accept this module. Verify the motherboard qualification list before purchase.
Installation follows the usual DIMM slot procedure: align the notch, press firmly until the retention clips lock, and confirm seating. The most common issue is mixing registered ECC with unbuffered memory or populating slots in an order the platform firmware does not support, which prevents boot.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M392B1G70DB0-YK0 |
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Samsung Chipset |
| Features | M392B1G70DB0-YK0 |
The module runs at DDR3L 1600 MHz with CL11 latency, providing the rated PC3L 12800 data rate when the platform operates at that speed.
Registered ECC adds a clock cycle for buffering and enables single-bit error correction, so the system sees the full 8 GB at up to 1600 MHz if the memory controller supports registered DIMMs.
It uses the standard 240-pin DDR3 DIMM form factor with 1.35 V low-voltage operation; verify your platform accepts DDR3L registered ECC modules before installing.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?