Acumen Disc H01-SATA3 1-to-1 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 1
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Acumen Disc
Standalone duplicator copies up to five SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M
The Acumen Disc H05-SATA2 duplicates one source SATA drive to up to five target 3.5" or 2.5" drives simultaneously. It operates as a standalone unit with no host computer or software required. The four-button controller and Athena controller with 128M buffer manage copy and erase tasks directly.
The duplicator transfers data at 300MB/s per slot, reaching 18GB per minute. It runs from an AC supply rated 115-230 V at 50/60 Hz. No fan specifications, noise figures or thermal data are provided in the supplier facts.
Each target bay accepts SATA 3.5" or 2.5" HDDs and SSDs directly in a slot-load design without adapters. The black panel houses five target slots plus the source port. Seven erase modes include DoD 5220.22-M three-pass and seven-pass, Secure Erase, Enhanced SSD Erase and HPA Erase.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H05-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 5 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Insert each 3.5" or 2.5" SATA drive directly into a slot; no adapter is required. The step often missed is ensuring the source drive is placed in the first slot and target drives in the remaining four slots before powering on.
The unit has no user-serviceable parts. The 128M buffer memory and Athena Controller are sealed. Only the AC power cord may need replacement if damaged.
The 300MB/s per-slot data transfer rate is the ceiling; sustained throughput cannot exceed this figure regardless of drive speed.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?