Acumen Disc H01-SATA3 1-to-1 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 1
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Acumen Disc
Standalone duplicator copies up to five SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M
The Acumen Disc H05-SATA2 duplicates one source SATA drive to up to five target 3.5" or 2.5" drives simultaneously. It operates as a standalone unit with no host computer or software required. The four-button controller and Athena controller with 128M buffer manage copy and erase tasks directly.
The duplicator transfers data at 300MB/s per slot, reaching 18GB per minute. It runs from an AC supply rated 115-230 V at 50/60 Hz. No fan specifications, noise figures or thermal data are provided in the supplier facts.
Each target bay accepts SATA 3.5" or 2.5" HDDs and SSDs directly in a slot-load design without adapters. The black panel houses five target slots plus the source port. Seven erase modes include DoD 5220.22-M three-pass and seven-pass, Secure Erase, Enhanced SSD Erase and HPA Erase.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H05-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 5 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Insert each 3.5" or 2.5" SATA drive directly into a slot; no adapter is required. The step often missed is ensuring the source drive is placed in the first slot and target drives in the remaining four slots before powering on.
The unit has no user-serviceable parts. The 128M buffer memory and Athena Controller are sealed. Only the AC power cord may need replacement if damaged.
The 300MB/s per-slot data transfer rate is the ceiling; sustained throughput cannot exceed this figure regardless of drive speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?