Acumen Disc H07-SATA3 1-to-7 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 7
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Acumen Disc
Standalone duplicator copies up to 15 SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M
The Acumen Disc H15-SATA2 duplicates up to 15 SATA hard drives or solid-state drives simultaneously. It accepts both 3.5-inch and 2.5-inch form factors without requiring an adapter. The unit operates completely standalone, needing no host computer or software installation for duplication or sanitisation tasks.
Each target slot sustains a maximum transfer rate of 300 MB per second, equating to roughly 18 GB per minute during copy operations. The duplicator uses a SATA II interface, so drives capable of higher SATA III speeds will be constrained by this ceiling. A 128 MB buffer helps maintain steady throughput across all active ports.
Drives load vertically into individual slot bays, allowing quick insertion and removal of 3.5-inch or 2.5-inch media. The Athena controller provides seven erase modes, including DoD 3-pass and 7-pass methods compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase for thorough data destruction. The unit runs on universal AC power from 115 to 230 V at 50 or 60 Hz.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H15-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 15 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The H15-SATA2 handles up to 15 SATA drives simultaneously, so choose it when you need to clone many 3.5" or 2.5" drives at once; a smaller unit suits lower-volume tasks.
Each slot can sustain up to 300 MB/s, delivering roughly 18 GB per minute per drive during System-and-Files or Whole-HDD copy modes.
The duplicator accepts any 3.5" or 2.5" SATA HDD or SSD without adapters; the SATA interface caps the transfer rate at the stated 300 MB/s per slot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?