We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black standalone SATA duplicator with 15 vertical slots for 2.5 and 3.5 drives

Acumen Disc

Acumen Disc H15-SATA2 1-to-15 SATA Duplicator 300MB/s

SKU CH-AXFJ-T2TE8

Standalone duplicator copies up to 15 SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorSATA
  • Target1 to 15
  • Buffer Memory128M

Target 1 to 15

Data Transfer Rate 300MB/s

  • Duplicates up to 15 SATA drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven sanitise modes including DoD 5220.22-M three-pass and seven-pass erase
  • Standalone operation with four-button controller — no host computer required
  • Accepts 2.5" and 3.5" SATA HDDs and SSDs without adapters

Target capacity and standalone use

The Acumen Disc H15-SATA2 duplicates up to 15 SATA hard drives or solid-state drives simultaneously. It accepts both 3.5-inch and 2.5-inch form factors without requiring an adapter. The unit operates completely standalone, needing no host computer or software installation for duplication or sanitisation tasks.

SATA interface throughput limits

Each target slot sustains a maximum transfer rate of 300 MB per second, equating to roughly 18 GB per minute during copy operations. The duplicator uses a SATA II interface, so drives capable of higher SATA III speeds will be constrained by this ceiling. A 128 MB buffer helps maintain steady throughput across all active ports.

Slot-loading rack and DoD-grade sanitisation

Drives load vertically into individual slot bays, allowing quick insertion and removal of 3.5-inch or 2.5-inch media. The Athena controller provides seven erase modes, including DoD 3-pass and 7-pass methods compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase for thorough data destruction. The unit runs on universal AC power from 115 to 230 V at 50 or 60 Hz.

Highlights

  • Duplicates up to 15 SATA drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven sanitise modes including DoD 5220.22-M three-pass and seven-pass erase
  • Standalone operation with four-button controller — no host computer required
  • Accepts 2.5" and 3.5" SATA HDDs and SSDs without adapters

Specifications

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH15-SATA2
Panel ColorBlack
Operating TypeStandalone
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 1-to-15 target model or a smaller duplicator?

The H15-SATA2 handles up to 15 SATA drives simultaneously, so choose it when you need to clone many 3.5" or 2.5" drives at once; a smaller unit suits lower-volume tasks.

What does the 300 MB/s copy speed mean when the duplicator is running?

Each slot can sustain up to 300 MB/s, delivering roughly 18 GB per minute per drive during System-and-Files or Whole-HDD copy modes.

The specs mention SATA — does that limit the drives I can use?

The duplicator accepts any 3.5" or 2.5" SATA HDD or SSD without adapters; the SATA interface caps the transfer rate at the stated 300 MB/s per slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.