Acumen Disc H07-SATA3 1-to-7 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 7
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Acumen Disc
Standalone duplicator copies up to 15 SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M
The Acumen Disc H15-SATA2 duplicates up to 15 SATA hard drives or solid-state drives simultaneously. It accepts both 3.5-inch and 2.5-inch form factors without requiring an adapter. The unit operates completely standalone, needing no host computer or software installation for duplication or sanitisation tasks.
Each target slot sustains a maximum transfer rate of 300 MB per second, equating to roughly 18 GB per minute during copy operations. The duplicator uses a SATA II interface, so drives capable of higher SATA III speeds will be constrained by this ceiling. A 128 MB buffer helps maintain steady throughput across all active ports.
Drives load vertically into individual slot bays, allowing quick insertion and removal of 3.5-inch or 2.5-inch media. The Athena controller provides seven erase modes, including DoD 3-pass and 7-pass methods compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase for thorough data destruction. The unit runs on universal AC power from 115 to 230 V at 50 or 60 Hz.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H15-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 15 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The H15-SATA2 handles up to 15 SATA drives simultaneously, so choose it when you need to clone many 3.5" or 2.5" drives at once; a smaller unit suits lower-volume tasks.
Each slot can sustain up to 300 MB/s, delivering roughly 18 GB per minute per drive during System-and-Files or Whole-HDD copy modes.
The duplicator accepts any 3.5" or 2.5" SATA HDD or SSD without adapters; the SATA interface caps the transfer rate at the stated 300 MB/s per slot.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?