Acumen Disc H07-SATA2 1-to-7 SATA Duplicator 300MB/s
- Hard Drive Duplicat…
- 1 to 7
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Acumen Disc
Standalone duplicator copies up to 11 SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M
The Acumen Disc H11-SATA2 copies up to eleven SATA hard drives or solid-state drives simultaneously without a host computer. It accepts both 3.5" and 2.5" drives directly in its slot-load bays and operates from a standard AC supply of 115-230 V at 50/60 Hz. The unit is intended for IT departments, forensic labs and data centres that need secure, high-volume duplication or sanitisation.
Each target slot maintains a data transfer rate of 300 MB/s, equivalent to 18 GB per minute, backed by 128 MB of buffer memory and the Athena controller. Two duplication modes are available: System and Files for quick copies, and Whole HDD for sector-by-sector imaging. The buffer smooths throughput during extended multi-drive jobs, preventing bottlenecks when all eleven bays are active.
Black slot-load bays hold drives securely without adapters, and a four-button panel navigates all functions. Seven erase modes cover Quick Erase, Full Erase, DoD 3-pass and 7-pass to the 5220.22-M standard, Secure Erase, Enhanced SSD Erase and HPA Erase. The standalone design removes software attack surfaces, while the 1-year parts-and-labour warranty plus lifetime technical support cover long-term service needs.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H11-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 11 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The unit uses a slot-load design with a 128 MB buffer and Athena Controller; no fan noise or thermal figures are published, so plan for normal rack airflow.
You need at least one source and one target SATA 3.5" or 2.5" HDD or SSD; no adapters or host PC are required.
Yes — the duplicator accepts any SATA 3.5" or 2.5" HDD or SSD regardless of link generation, copying sector-by-sector at up to 300 MB/s.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?