Acumen Disc H05-SATA3 1-to-5 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 5
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Acumen Disc
Duplicates seven SATA drives at 600 MB/s with DoD-compliant erase modes
The Acumen Disc H07-SATA3 is a standalone duplicator that copies one source SATA drive to up to seven target drives simultaneously. It operates without a host computer or software, using a four-button controller to select copy or erase functions. The unit accepts both 3.5" and 2.5" SATA hard drives and solid-state drives directly in its slot-loading bays. Power is drawn from a 115-230 V AC supply.
This duplicator suits IT professionals, system integrators and data centres that need to deploy identical drive images or securely sanitise batches of SATA storage. The seven erase modes include DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase. Buyers who require duplication of drives with interfaces other than SATA, or who need network-connected management and logging, will find those features absent.
The maximum data transfer rate is 600 MB/s, equivalent to 36 GB per minute, applied independently to each of the seven target slots. Two copy modes are available: System and Files (Quick Copy) copies only used space, while Whole HDD (Full Copy) duplicates every sector regardless of content. There is no capacity limitation on the source or target drives. This throughput figure determines whether the unit meets your batch-processing time requirements.
| Brand | Acumen Disc |
|---|---|
| Part Number | H07-SATA3 |
| Type | Hard Drive Duplicator |
| Target | 1 to 7 |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 600MB/s |
| Operating Type | Standalone |
| Connector | SATA |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The unit operates from 115–230 V AC at 50/60 Hz and uses a slot-load design that keeps drives seated while the copy or erase cycle runs.
It accepts 3.5" and 2.5" SATA hard drives and SSDs directly in each slot — no adapter is required for either form factor.
Yes, any 3.5" or 2.5" SATA drive fits the seven target slots and copies at up to 600 MB/s with no capacity limit.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?