Acumen Disc H05-SATA3 1-to-5 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 5
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Acumen Disc
Duplicates seven SATA drives at 600 MB/s with DoD-compliant erase modes
The Acumen Disc H07-SATA3 is a standalone duplicator that copies one source SATA drive to up to seven target drives simultaneously. It operates without a host computer or software, using a four-button controller to select copy or erase functions. The unit accepts both 3.5" and 2.5" SATA hard drives and solid-state drives directly in its slot-loading bays. Power is drawn from a 115-230 V AC supply.
This duplicator suits IT professionals, system integrators and data centres that need to deploy identical drive images or securely sanitise batches of SATA storage. The seven erase modes include DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase. Buyers who require duplication of drives with interfaces other than SATA, or who need network-connected management and logging, will find those features absent.
The maximum data transfer rate is 600 MB/s, equivalent to 36 GB per minute, applied independently to each of the seven target slots. Two copy modes are available: System and Files (Quick Copy) copies only used space, while Whole HDD (Full Copy) duplicates every sector regardless of content. There is no capacity limitation on the source or target drives. This throughput figure determines whether the unit meets your batch-processing time requirements.
| Brand | Acumen Disc |
|---|---|
| Part Number | H07-SATA3 |
| Type | Hard Drive Duplicator |
| Target | 1 to 7 |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 600MB/s |
| Operating Type | Standalone |
| Connector | SATA |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The unit operates from 115–230 V AC at 50/60 Hz and uses a slot-load design that keeps drives seated while the copy or erase cycle runs.
It accepts 3.5" and 2.5" SATA hard drives and SSDs directly in each slot — no adapter is required for either form factor.
Yes, any 3.5" or 2.5" SATA drive fits the seven target slots and copies at up to 600 MB/s with no capacity limit.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?