Acumen Disc H05-SATA3 1-to-5 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 5
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Acumen Disc
Duplicates seven SATA drives at 600 MB/s with DoD-compliant erase modes
The Acumen Disc H07-SATA3 is a standalone duplicator that copies one source SATA drive to up to seven target drives simultaneously. It operates without a host computer or software, using a four-button controller to select copy or erase functions. The unit accepts both 3.5" and 2.5" SATA hard drives and solid-state drives directly in its slot-loading bays. Power is drawn from a 115-230 V AC supply.
This duplicator suits IT professionals, system integrators and data centres that need to deploy identical drive images or securely sanitise batches of SATA storage. The seven erase modes include DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase. Buyers who require duplication of drives with interfaces other than SATA, or who need network-connected management and logging, will find those features absent.
The maximum data transfer rate is 600 MB/s, equivalent to 36 GB per minute, applied independently to each of the seven target slots. Two copy modes are available: System and Files (Quick Copy) copies only used space, while Whole HDD (Full Copy) duplicates every sector regardless of content. There is no capacity limitation on the source or target drives. This throughput figure determines whether the unit meets your batch-processing time requirements.
| Brand | Acumen Disc |
|---|---|
| Part Number | H07-SATA3 |
| Type | Hard Drive Duplicator |
| Target | 1 to 7 |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 600MB/s |
| Operating Type | Standalone |
| Connector | SATA |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The unit operates from 115–230 V AC at 50/60 Hz and uses a slot-load design that keeps drives seated while the copy or erase cycle runs.
It accepts 3.5" and 2.5" SATA hard drives and SSDs directly in each slot — no adapter is required for either form factor.
Yes, any 3.5" or 2.5" SATA drive fits the seven target slots and copies at up to 600 MB/s with no capacity limit.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?