Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black standalone duplicator with 15 vertical SATA slots and 16x2 LCD

Acumen Disc

Acumen Disc H15-SATA150 Hard Drive Duplicator 15 Target 150MB/s

SKU CH-NYXH-WD4JW

Standalone duplicator copies up to 15 SATA drives at 150 MB/s with four DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 15

Target 1 to 15

Data Transfer Rate 150MB/s

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

15-Target SATA Duplicator

The Acumen Disc H15-SATA150 is a standalone hard drive duplicator that copies up to 15 SATA drives simultaneously. It accepts both 3.5 and 2.5 inch HDDs and SSDs without adapters and operates through a 16 x 2 LCD with a four-button controller.

High-volume duplication and sanitisation

It suits IT departments, forensic labs and data centres that need to clone or securely erase many drives at once without a host PC. It is not for users who require interfaces other than SATA, or for environments that need network-connected management and remote job scheduling.

150 MB/s per slot transfer rate

Each of the 15 target ports sustains up to 150 MB/s during copy or erase operations. The Athena controller provides two copy modes and four erase modes, including DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard.

Poudarki

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

Specifikacije

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH15-SATA150
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Druge različice tega modela

še 5 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

What drives must I already have to use the 15 target slots on the H15-SATA150 duplicator?

You need up to 15 SATA 3.5" hard drives or 2.5" SSDs; the unit accepts both form factors directly without an adapter.

Will the duplicator work with older SATA I drives I still keep in storage?

Yes, it copies SATA I drives at up to 150 MB/s per slot; the Athena controller handles the slower interface automatically.

How can I confirm the H15-SATA150 is copying correctly after I start a job?

The 16 x 2 LCD shows real-time progress, speed and pass/fail status for each of the 15 targets during duplication or erase.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.