Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black standalone duplicator with 15 vertical SATA slots and 16x2 LCD

Acumen Disc

Acumen Disc H15-SATA150 Hard Drive Duplicator 15 Target 150MB/s

SKU CH-NYXH-WD4JW

Standalone duplicator copies up to 15 SATA drives at 150 MB/s with four DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 15

Target 1 to 15

Data Transfer Rate 150MB/s

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

15-Target SATA Duplicator

The Acumen Disc H15-SATA150 is a standalone hard drive duplicator that copies up to 15 SATA drives simultaneously. It accepts both 3.5 and 2.5 inch HDDs and SSDs without adapters and operates through a 16 x 2 LCD with a four-button controller.

High-volume duplication and sanitisation

It suits IT departments, forensic labs and data centres that need to clone or securely erase many drives at once without a host PC. It is not for users who require interfaces other than SATA, or for environments that need network-connected management and remote job scheduling.

150 MB/s per slot transfer rate

Each of the 15 target ports sustains up to 150 MB/s during copy or erase operations. The Athena controller provides two copy modes and four erase modes, including DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard.

Puncte forte

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

Specificații

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH15-SATA150
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What drives must I already have to use the 15 target slots on the H15-SATA150 duplicator?

You need up to 15 SATA 3.5" hard drives or 2.5" SSDs; the unit accepts both form factors directly without an adapter.

Will the duplicator work with older SATA I drives I still keep in storage?

Yes, it copies SATA I drives at up to 150 MB/s per slot; the Athena controller handles the slower interface automatically.

How can I confirm the H15-SATA150 is copying correctly after I start a job?

The 16 x 2 LCD shows real-time progress, speed and pass/fail status for each of the 15 targets during duplication or erase.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.