Acumen Disc H03-SATA150 1-to-3 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 3
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Acumen Disc
Standalone SATA duplicator copies one 3.5" or 2.5" drive to another at 300 MB/s and offers seven erase modes including DoD 5220.22-M
The Acumen Disc H01-SATA2 is a standalone hard drive duplicator that copies one SATA drive to another at up to 300 MB/s. It accepts both 3.5" and 2.5" SATA hard drives and solid state drives without an adapter. The unit operates independently of a host computer using a four-button controller and an Athena controller with 128 MB of buffer memory.
This duplicator suits technicians who must clone or sanitise individual SATA drives in the field or on a bench. It offers seven erase modes, including DoD 3-pass and 7-pass methods compliant with the 5220.22-M standard, plus Secure Erase and HPA Erase. Organisations that require simultaneous multi-target duplication or support for non-SATA interfaces should consider other equipment.
The single specification that determines suitability is the 300 MB/s data transfer rate provided by the SATA interface. At this speed the duplicator can move roughly 18 GB per minute, making it practical for high-capacity drives. If your workflow demands higher throughput or a different interface, this unit will not meet that requirement.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H01-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 1 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
The duplicator copies at up to 300MB/s, which equals 18GB per minute, using its Athena Controller and 128MB buffer.
It runs on 115-230 V AC at 50/60 Hz with a standalone slot-load design; no external computer or host connection is required.
Both 3.5" and 2.5" SATA hard drives and SSDs are supported natively in the slot.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?