אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black standalone SATA duplicator with two vertical slots for 2.5 and 3.5 inch drives

Acumen Disc

Acumen Disc H01-SATA2 Hard Drive Duplicator 1 to 1 SATA 300MB/s

SKU CH-6996-EPZKJ

Standalone SATA duplicator copies one 3.5" or 2.5" drive to another at 300 MB/s and offers seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorSATA
  • Target1 to 1
  • Buffer Memory128M

Target 1 to 1

Data Transfer Rate 300MB/s

  • Standalone operation needs no host computer for secure copying
  • Copies up to 300 MB/s for fast duplication
  • Supports 3.5" and 2.5" SATA drives without adapters
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • 128 MB buffer with Athena controller ensures reliable transfers

Standalone SATA duplicator with DoD erase

The Acumen Disc H01-SATA2 is a standalone hard drive duplicator that copies one SATA drive to another at up to 300 MB/s. It accepts both 3.5" and 2.5" SATA hard drives and solid state drives without an adapter. The unit operates independently of a host computer using a four-button controller and an Athena controller with 128 MB of buffer memory.

For IT teams needing secure single-drive cloning

This duplicator suits technicians who must clone or sanitise individual SATA drives in the field or on a bench. It offers seven erase modes, including DoD 3-pass and 7-pass methods compliant with the 5220.22-M standard, plus Secure Erase and HPA Erase. Organisations that require simultaneous multi-target duplication or support for non-SATA interfaces should consider other equipment.

300 MB/s maximum copy speed over SATA

The single specification that determines suitability is the 300 MB/s data transfer rate provided by the SATA interface. At this speed the duplicator can move roughly 18 GB per minute, making it practical for high-capacity drives. If your workflow demands higher throughput or a different interface, this unit will not meet that requirement.

נקודות עיקריות

  • Standalone operation needs no host computer for secure copying
  • Copies up to 300 MB/s for fast duplication
  • Supports 3.5" and 2.5" SATA drives without adapters
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • 128 MB buffer with Athena controller ensures reliable transfers

מפרט טכני

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH01-SATA2
Panel ColorBlack
Operating TypeStandalone
ConnectorSATA
Target1 to 1
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

What is the maximum sustained data transfer rate of the Acumen Disc H01-SATA2 duplicator?

The duplicator copies at up to 300MB/s, which equals 18GB per minute, using its Athena Controller and 128MB buffer.

How much power does the unit draw and what cooling does it need for all-day operation?

It runs on 115-230 V AC at 50/60 Hz with a standalone slot-load design; no external computer or host connection is required.

Which drives can I insert directly without buying extra adapters?

Both 3.5" and 2.5" SATA hard drives and SSDs are supported natively in the slot.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.