Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black standalone duplicator with 15 vertical SATA slots and 16x2 LCD

Acumen Disc

Acumen Disc H15-SATA150 Hard Drive Duplicator 15 Target 150MB/s

SKU CH-NYXH-WD4JW

Standalone duplicator copies up to 15 SATA drives at 150 MB/s with four DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • Display16 x 2 LCD
  • ConnectorSATA
  • Target1 to 15

Target 1 to 15

Data Transfer Rate 150MB/s

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

15-Target SATA Duplicator

The Acumen Disc H15-SATA150 is a standalone hard drive duplicator that copies up to 15 SATA drives simultaneously. It accepts both 3.5 and 2.5 inch HDDs and SSDs without adapters and operates through a 16 x 2 LCD with a four-button controller.

High-volume duplication and sanitisation

It suits IT departments, forensic labs and data centres that need to clone or securely erase many drives at once without a host PC. It is not for users who require interfaces other than SATA, or for environments that need network-connected management and remote job scheduling.

150 MB/s per slot transfer rate

Each of the 15 target ports sustains up to 150 MB/s during copy or erase operations. The Athena controller provides two copy modes and four erase modes, including DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard.

Helstu kostir

  • Copies 15 drives simultaneously at 150 MB/s
  • Two copy modes: quick file or full sector duplication
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA drives without adapters
  • Standalone operation via 16×2 LCD and 4-button controller

Tæknilýsing

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH15-SATA150
Panel ColorBlack
Operating TypeStandalone
Display16 x 2 LCD
ConnectorSATA
Target1 to 15
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What drives must I already have to use the 15 target slots on the H15-SATA150 duplicator?

You need up to 15 SATA 3.5" hard drives or 2.5" SSDs; the unit accepts both form factors directly without an adapter.

Will the duplicator work with older SATA I drives I still keep in storage?

Yes, it copies SATA I drives at up to 150 MB/s per slot; the Athena controller handles the slower interface automatically.

How can I confirm the H15-SATA150 is copying correctly after I start a job?

The 16 x 2 LCD shows real-time progress, speed and pass/fail status for each of the 15 targets during duplication or erase.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.