Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular black chassis with seven vertical SATA drive slots and a four-button control panel

Acumen Disc

Acumen Disc H07-SATA2 1-to-7 SATA Duplicator 300MB/s

SKU CH-VA25-NCFXR

Standalone duplicator copies up to seven SATA drives at 300 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128M
  • ControllerAthena Controller
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate300MB/s

Target 1 to 7

Data Transfer Rate 300MB/s

  • Copies up to 7 drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation — no host computer or software required

Standalone SATA Duplicator with Seven Targets

This Acumen Disc duplicator copies up to seven SATA hard drives or solid-state drives simultaneously at 300 MB/s. It operates without a host computer, using an Athena controller and 128 MB buffer to manage duplication and secure erase tasks directly from the front panel.

Suits IT teams sanitising

The unit handles both drive form factors without adapters and offers two copy modes plus seven erase modes including DoD 3-pass and 7-pass standards. It is not for users who need more than seven target slots or who require interfaces other than SATA.

300 MB/s per-slot transfer rate

Each of the seven target bays sustains up to 300 MB/s during duplication, delivering 18 GB per minute. The 128 MB buffer and standalone architecture keep throughput consistent across all slots without host bottlenecks.

Helstu kostir

  • Copies up to 7 drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation — no host computer or software required

Tæknilýsing

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH07-SATA2
Target1 to 7
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the duplicator handle my existing 3.5" and 2.5" SATA drives without extra adapters?

Yes, the unit accepts both 3.5" and 2.5" SATA hard drives and SSDs directly in the seven slots; no adapters are required.

How can I confirm the duplicator copied every sector correctly after a job finishes?

The Athena Controller verifies each sector during Whole HDD mode; a pass indication on the four-button display confirms the target matches the source bit-for-bit.

What ships with the H07-SATA2 and what must I provide?

The duplicator includes the standalone chassis, power cord for 115-230 V supply, and the four-button controller; you supply up to seven SATA HDDs or SSDs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.