暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular black chassis with seven vertical SATA drive slots and a four-button control panel

Acumen Disc

Acumen Disc H07-SATA2 1-to-7 SATA Duplicator 300MB/s

SKU CH-VA25-NCFXR

Standalone duplicator copies up to seven SATA drives at 300 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128M
  • ControllerAthena Controller
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate300MB/s

Target 1 to 7

Data Transfer Rate 300MB/s

  • Copies up to 7 drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation — no host computer or software required

Standalone SATA Duplicator with Seven Targets

This Acumen Disc duplicator copies up to seven SATA hard drives or solid-state drives simultaneously at 300 MB/s. It operates without a host computer, using an Athena controller and 128 MB buffer to manage duplication and secure erase tasks directly from the front panel.

Suits IT teams sanitising

The unit handles both drive form factors without adapters and offers two copy modes plus seven erase modes including DoD 3-pass and 7-pass standards. It is not for users who need more than seven target slots or who require interfaces other than SATA.

300 MB/s per-slot transfer rate

Each of the seven target bays sustains up to 300 MB/s during duplication, delivering 18 GB per minute. The 128 MB buffer and standalone architecture keep throughput consistent across all slots without host bottlenecks.

特長

  • Copies up to 7 drives simultaneously at 300 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation — no host computer or software required

仕様

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH07-SATA2
Target1 to 7
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the duplicator handle my existing 3.5" and 2.5" SATA drives without extra adapters?

Yes, the unit accepts both 3.5" and 2.5" SATA hard drives and SSDs directly in the seven slots; no adapters are required.

How can I confirm the duplicator copied every sector correctly after a job finishes?

The Athena Controller verifies each sector during Whole HDD mode; a pass indication on the four-button display confirms the target matches the source bit-for-bit.

What ships with the H07-SATA2 and what must I provide?

The duplicator includes the standalone chassis, power cord for 115-230 V supply, and the four-button controller; you supply up to seven SATA HDDs or SSDs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。