暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black desktop duplicator tower with nine vertical SATA drive slots and a four-button control panel

Acumen Disc

Acumen Disc H09-SATA3 1-to-9 SATA Duplicator 600MB/s

SKU CH-EFX9-AS82A

Standalone SATA duplicator copies up to nine 2.5" or 3.5" drives at 600 MB/s with seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 9

Data Transfer Rate 600MB/s

  • Copy 9 SATA drives simultaneously at 600MB/s per slot
  • Two duplication modes copy whole drives or essential files only
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Operates standalone with no computer or software required
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

Standalone 1-to-9 SATA duplicator

The Acumen Disc H09-SATA3 duplicates up to 9 SATA hard drives or solid-state drives simultaneously. It operates without a host computer, so no software or host connection is required. The unit accepts 3.5" and 2.5" SATA drives directly in its slot-load bays. It is built for IT teams, forensic labs and duplication services that need secure, standalone copying and sanitising.

SATA interface throughput and erase compliance

Each bay runs at up to 600MB/s, delivering 36GB per minute per slot during copy operations. The controller offers two copy modes: System and Files for quick copying, and Whole HDD for a full sector-by-sector image. Seven erase modes are available, including Quick Erase, Full Erase, Secure Erase, Enhanced SSD Erase, HPA Erase, and DoD 3-pass and 7-pass methods compliant with the 5220.22-M standard.

Slot-load bays and AC power input

Drives insert vertically into the slot-load bays without adapters for either 3.5" or 2.5" form factors. The chassis houses an internal power supply that accepts 115-230 V AC at 50/60 Hz, so the unit plugs directly into mains power. Four front-panel buttons control all duplication and erase functions. The design targets users who need a dedicated, rack-mountable duplicator rather than a portable USB dock.

特長

  • Copy 9 SATA drives simultaneously at 600MB/s per slot
  • Two duplication modes copy whole drives or essential files only
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Operates standalone with no computer or software required
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

仕様

BrandAcumen Disc
Part NumberH09-SATA3
TypeHard Drive Duplicator
Target1 to 9
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How many drives can I duplicate at once with this model?

The duplicator has nine target slots, so you can copy up to nine SATA drives simultaneously.

What does the 600MB/s rate mean when the duplicator is running?

Each target slot can receive data at up to 600MB/s, delivering 36GB per minute during a copy operation.

Which SATA interface standard does the duplicator use and what speed does it cap at?

It uses the SATA interface at 600MB/s, which is the maximum throughput for the connected drives.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。