Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Acumen Disc

Acumen Disc H09-SATA3 1-to-9 SATA Duplicator 600MB/s

SKU CH-EFX9-AS82A

Standalone SATA duplicator copies up to nine 2.5" or 3.5" drives at 600 MB/s with seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Data Transfer Rate 600MB/s

  • Copy 9 SATA drives simultaneously at 600MB/s per slot
  • Two duplication modes copy whole drives or essential files only
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Operates standalone with no computer or software required
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

Standalone 1-to-9 SATA duplicator

The Acumen Disc H09-SATA3 duplicates up to 9 SATA hard drives or solid-state drives simultaneously. It operates without a host computer, so no software or host connection is required. The unit accepts 3.5" and 2.5" SATA drives directly in its slot-load bays. It is built for IT teams, forensic labs and duplication services that need secure, standalone copying and sanitising.

SATA interface throughput and erase compliance

Each bay runs at up to 600MB/s, delivering 36GB per minute per slot during copy operations. The controller offers two copy modes: System and Files for quick copying, and Whole HDD for a full sector-by-sector image. Seven erase modes are available, including Quick Erase, Full Erase, Secure Erase, Enhanced SSD Erase, HPA Erase, and DoD 3-pass and 7-pass methods compliant with the 5220.22-M standard.

Slot-load bays and AC power input

Drives insert vertically into the slot-load bays without adapters for either 3.5" or 2.5" form factors. The chassis houses an internal power supply that accepts 115-230 V AC at 50/60 Hz, so the unit plugs directly into mains power. Four front-panel buttons control all duplication and erase functions. The design targets users who need a dedicated, rack-mountable duplicator rather than a portable USB dock.

Helstu kostir

  • Copy 9 SATA drives simultaneously at 600MB/s per slot
  • Two duplication modes copy whole drives or essential files only
  • Seven erase modes include DoD 3-pass and 7-pass standards
  • Operates standalone with no computer or software required
  • Supports 2.5" and 3.5" SATA HDDs and SSDs without adapters

Tæknilýsing

BrandAcumen Disc
Part NumberH09-SATA3
TypeHard Drive Duplicator
Target1 to 9
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How many drives can I duplicate at once with this model?

The duplicator has nine target slots, so you can copy up to nine SATA drives simultaneously.

What does the 600MB/s rate mean when the duplicator is running?

Each target slot can receive data at up to 600MB/s, delivering 36GB per minute during a copy operation.

Which SATA interface standard does the duplicator use and what speed does it cap at?

It uses the SATA interface at 600MB/s, which is the maximum throughput for the connected drives.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.