暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone duplicator tower with three front-loading SATA drive slots and a four-button control panel

Acumen Disc

Acumen Disc H03-SATA3 1-to-3 SATA Duplicator 600MB/s

SKU CH-ZQBA-2SGM3

Standalone duplicator copies up to three SATA drives at 600 MB/s with seven erase modes including DoD standards

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 3

Data Transfer Rate 600MB/s

  • Copies three drives at once at 600MB/s
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation with four-button controller — no PC needed

Target and operation

The Acumen Disc H03-SATA3 duplicates one source SATA drive onto up to three target drives simultaneously. It operates as a standalone unit, requiring no host computer or software to run copy or erase tasks.

Capacity and headroom

The duplicator imposes no capacity ceiling, so any SATA HDD or SSD can be processed regardless of size. Transfer reaches 600MB/s, delivering roughly 36GB per minute per slot, though actual throughput will fall below that peak with slower source media.

Build and daily use

Drives load vertically into three slot bays that accept both 3.5in and 2.5in SATA devices without adapters. A four-button controller manages all functions, including seven erase modes such as DoD 5220.22-M three-pass and seven-pass sanitisation. Power is drawn from a 115-230V AC supply.

特長

  • Copies three drives at once at 600MB/s
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation with four-button controller — no PC needed

仕様

BrandAcumen Disc
Part NumberH03-SATA3
TypeHard Drive Duplicator
Target1 to 3
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this duplicator work with the 3.5" SATA drives I already own?

Yes, it accepts both 3.5" and 2.5" SATA hard drives and SSDs directly in the slot without any adapter required.

How can I verify the duplicator is copying correctly at the stated 600MB/s?

The four-button controller lets you select System and Files (Quick Copy) or Whole HDD (Full Copy) modes; the unit runs standalone so you can watch the progress on its display.

What comes in the box and do I need extra cables or adapters for 2.5" SSDs?

The duplicator includes the rack slots for direct insertion; both 3.5" and 2.5" SATA drives fit without adapters, and the built-in 115-230 V power supply handles mains connection.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。