저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black standalone duplicator tower with three front-loading SATA drive slots and a four-button control panel

Acumen Disc

Acumen Disc H03-SATA3 1-to-3 SATA Duplicator 600MB/s

SKU CH-ZQBA-2SGM3

Standalone duplicator copies up to three SATA drives at 600 MB/s with seven erase modes including DoD standards

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 3

Data Transfer Rate 600MB/s

  • Copies three drives at once at 600MB/s
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation with four-button controller — no PC needed

Target and operation

The Acumen Disc H03-SATA3 duplicates one source SATA drive onto up to three target drives simultaneously. It operates as a standalone unit, requiring no host computer or software to run copy or erase tasks.

Capacity and headroom

The duplicator imposes no capacity ceiling, so any SATA HDD or SSD can be processed regardless of size. Transfer reaches 600MB/s, delivering roughly 36GB per minute per slot, though actual throughput will fall below that peak with slower source media.

Build and daily use

Drives load vertically into three slot bays that accept both 3.5in and 2.5in SATA devices without adapters. A four-button controller manages all functions, including seven erase modes such as DoD 5220.22-M three-pass and seven-pass sanitisation. Power is drawn from a 115-230V AC supply.

주요 특징

  • Copies three drives at once at 600MB/s
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation with four-button controller — no PC needed

사양

BrandAcumen Disc
Part NumberH03-SATA3
TypeHard Drive Duplicator
Target1 to 3
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this duplicator work with the 3.5" SATA drives I already own?

Yes, it accepts both 3.5" and 2.5" SATA hard drives and SSDs directly in the slot without any adapter required.

How can I verify the duplicator is copying correctly at the stated 600MB/s?

The four-button controller lets you select System and Files (Quick Copy) or Whole HDD (Full Copy) modes; the unit runs standalone so you can watch the progress on its display.

What comes in the box and do I need extra cables or adapters for 2.5" SSDs?

The duplicator includes the rack slots for direct insertion; both 3.5" and 2.5" SATA drives fit without adapters, and the built-in 115-230 V power supply handles mains connection.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.