저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular black metal box with two vertical SATA drive slots and a small four-button control panel on the front

Acumen Disc

Acumen Disc H01-SATA3 1-to-1 SATA Duplicator 600MB/s

SKU CH-7KFQ-7N68C

Standalone SATA duplicator copies one 3.5" or 2.5" drive at 600 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 1
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 1

Data Transfer Rate 600MB/s

  • Duplicates one SATA drive at 600 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs or SSDs without adapters
  • Standalone operation — no PC or software required for secure copying

Standalone 1-to-1 SATA duplicator

The Acumen Disc H01-SATA3 copies one SATA hard drive or SSD to another at up to 600MB/s. It runs without a host computer, so no software installation is required. The unit accepts both 3.5" and 2.5" drives directly in its slot-load bays. Power is drawn from a 115-230 V AC supply.

IT teams sanitising drives.

This duplicator suits IT departments that need secure, standalone duplication and DoD-compliant erasure for single drives. It offers seven erase modes, including 3-pass and 7-pass DoD 5220.22-M standards. Buyers who need to clone one source to several targets simultaneously should look at a multi-bay duplicator instead.

600MB/s maximum copy speed

The key specification is the 600MB/s (36GB/min) peak transfer rate, which sets the pace for both System-and-Files quick copy and whole-drive full copy modes. Actual throughput will depend on the source and target drive performance. No capacity ceiling is imposed by the duplicator itself.

주요 특징

  • Duplicates one SATA drive at 600 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs or SSDs without adapters
  • Standalone operation — no PC or software required for secure copying

사양

BrandAcumen Disc
Part NumberH01-SATA3
TypeHard Drive Duplicator
Target1 to 1
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How do I install a 3.5" or 2.5" SATA drive into the Acumen Disc H01-SATA3 duplicator slot, and what step do people often miss?

Slide the SATA HDD or SSD straight into the front slot until it seats firmly on the internal connector; the step many miss is confirming the drive clicks fully home before starting a copy or erase job.

What maintenance or replacement will the Acumen Disc H01-SATA3 need over time?

The unit has no user-serviceable parts; keep the slot free of dust and verify the AC 115-230 V power inlet stays clean — drives themselves are the only items you will replace.

What limit appears first during sustained duplication at 600 MB/s on the Acumen Disc H01-SATA3?

The source or target drive’s own sustained write speed becomes the bottleneck before the duplicator’s 600 MB/s interface limit is reached.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.