我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular black metal box with two vertical SATA drive slots and a small four-button control panel on the front

Acumen Disc

Acumen Disc H01-SATA3 1-to-1 SATA Duplicator 600MB/s

SKU CH-7KFQ-7N68C

Standalone SATA duplicator copies one 3.5" or 2.5" drive at 600 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 1
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 1

Data Transfer Rate 600MB/s

  • Duplicates one SATA drive at 600 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs or SSDs without adapters
  • Standalone operation — no PC or software required for secure copying

Standalone 1-to-1 SATA duplicator

The Acumen Disc H01-SATA3 copies one SATA hard drive or SSD to another at up to 600MB/s. It runs without a host computer, so no software installation is required. The unit accepts both 3.5" and 2.5" drives directly in its slot-load bays. Power is drawn from a 115-230 V AC supply.

IT teams sanitising drives.

This duplicator suits IT departments that need secure, standalone duplication and DoD-compliant erasure for single drives. It offers seven erase modes, including 3-pass and 7-pass DoD 5220.22-M standards. Buyers who need to clone one source to several targets simultaneously should look at a multi-bay duplicator instead.

600MB/s maximum copy speed

The key specification is the 600MB/s (36GB/min) peak transfer rate, which sets the pace for both System-and-Files quick copy and whole-drive full copy modes. Actual throughput will depend on the source and target drive performance. No capacity ceiling is imposed by the duplicator itself.

商品特色

  • Duplicates one SATA drive at 600 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs or SSDs without adapters
  • Standalone operation — no PC or software required for secure copying

商品規格

BrandAcumen Disc
Part NumberH01-SATA3
TypeHard Drive Duplicator
Target1 to 1
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install a 3.5" or 2.5" SATA drive into the Acumen Disc H01-SATA3 duplicator slot, and what step do people often miss?

Slide the SATA HDD or SSD straight into the front slot until it seats firmly on the internal connector; the step many miss is confirming the drive clicks fully home before starting a copy or erase job.

What maintenance or replacement will the Acumen Disc H01-SATA3 need over time?

The unit has no user-serviceable parts; keep the slot free of dust and verify the AC 115-230 V power inlet stays clean — drives themselves are the only items you will replace.

What limit appears first during sustained duplication at 600 MB/s on the Acumen Disc H01-SATA3?

The source or target drive’s own sustained write speed becomes the bottleneck before the duplicator’s 600 MB/s interface limit is reached.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。