نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular black metal box with two vertical SATA drive slots and a small four-button control panel on the front

Acumen Disc

Acumen Disc H01-SATA3 1-to-1 SATA Duplicator 600MB/s

SKU CH-7KFQ-7N68C

Standalone SATA duplicator copies one 3.5" or 2.5" drive at 600 MB/s with seven DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 1
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 1

Data Transfer Rate 600MB/s

  • Duplicates one SATA drive at 600 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs or SSDs without adapters
  • Standalone operation — no PC or software required for secure copying

Standalone 1-to-1 SATA duplicator

The Acumen Disc H01-SATA3 copies one SATA hard drive or SSD to another at up to 600MB/s. It runs without a host computer, so no software installation is required. The unit accepts both 3.5" and 2.5" drives directly in its slot-load bays. Power is drawn from a 115-230 V AC supply.

IT teams sanitising drives.

This duplicator suits IT departments that need secure, standalone duplication and DoD-compliant erasure for single drives. It offers seven erase modes, including 3-pass and 7-pass DoD 5220.22-M standards. Buyers who need to clone one source to several targets simultaneously should look at a multi-bay duplicator instead.

600MB/s maximum copy speed

The key specification is the 600MB/s (36GB/min) peak transfer rate, which sets the pace for both System-and-Files quick copy and whole-drive full copy modes. Actual throughput will depend on the source and target drive performance. No capacity ceiling is imposed by the duplicator itself.

أبرز المميزات

  • Duplicates one SATA drive at 600 MB/s per slot
  • Two copy modes: quick file copy or full sector-by-sector clone
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 2.5" and 3.5" SATA HDDs or SSDs without adapters
  • Standalone operation — no PC or software required for secure copying

المواصفات

BrandAcumen Disc
Part NumberH01-SATA3
TypeHard Drive Duplicator
Target1 to 1
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I install a 3.5" or 2.5" SATA drive into the Acumen Disc H01-SATA3 duplicator slot, and what step do people often miss?

Slide the SATA HDD or SSD straight into the front slot until it seats firmly on the internal connector; the step many miss is confirming the drive clicks fully home before starting a copy or erase job.

What maintenance or replacement will the Acumen Disc H01-SATA3 need over time?

The unit has no user-serviceable parts; keep the slot free of dust and verify the AC 115-230 V power inlet stays clean — drives themselves are the only items you will replace.

What limit appears first during sustained duplication at 600 MB/s on the Acumen Disc H01-SATA3?

The source or target drive’s own sustained write speed becomes the bottleneck before the duplicator’s 600 MB/s interface limit is reached.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.