저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Rectangular silver tower with seven vertical drive slots on the front panel

Acumen Disc

Acumen Disc H07-SATA3 1-to-7 SATA Duplicator 600MB/s

SKU CH-R5GG-62HBN

Duplicates seven SATA drives at 600 MB/s with DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
  • Data Transfer Rate600MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 7

Data Transfer Rate 600MB/s

  • Copies up to 7 drives simultaneously at 600MB/s each
  • Two duplication modes: quick file copy or full sector-by-sector clone
  • Seven sanitisation modes including DoD 3-pass and 7-pass standards
  • Standalone operation — no host computer or software required
  • Accepts 3.5" and 2.5" SATA HDDs or SSDs without adapters

Standalone SATA Duplicator

The Acumen Disc H07-SATA3 is a standalone duplicator that copies one source SATA drive to up to seven target drives simultaneously. It operates without a host computer or software, using a four-button controller to select copy or erase functions. The unit accepts both 3.5" and 2.5" SATA hard drives and solid-state drives directly in its slot-loading bays. Power is drawn from a 115-230 V AC supply.

IT Professionals and Data Centres

This duplicator suits IT professionals, system integrators and data centres that need to deploy identical drive images or securely sanitise batches of SATA storage. The seven erase modes include DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase. Buyers who require duplication of drives with interfaces other than SATA, or who need network-connected management and logging, will find those features absent.

600 MB/s Copy Speed

The maximum data transfer rate is 600 MB/s, equivalent to 36 GB per minute, applied independently to each of the seven target slots. Two copy modes are available: System and Files (Quick Copy) copies only used space, while Whole HDD (Full Copy) duplicates every sector regardless of content. There is no capacity limitation on the source or target drives. This throughput figure determines whether the unit meets your batch-processing time requirements.

주요 특징

  • Copies up to 7 drives simultaneously at 600MB/s each
  • Two duplication modes: quick file copy or full sector-by-sector clone
  • Seven sanitisation modes including DoD 3-pass and 7-pass standards
  • Standalone operation — no host computer or software required
  • Accepts 3.5" and 2.5" SATA HDDs or SSDs without adapters

사양

BrandAcumen Disc
Part NumberH07-SATA3
TypeHard Drive Duplicator
Target1 to 7
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate600MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How hot or noisy does the duplicator get when it runs all day copying seven drives at 600 MB/s?

The unit operates from 115–230 V AC at 50/60 Hz and uses a slot-load design that keeps drives seated while the copy or erase cycle runs.

What drives or adapters do I already need to own before I can start duplicating with this unit?

It accepts 3.5" and 2.5" SATA hard drives and SSDs directly in each slot — no adapter is required for either form factor.

Will the duplicator work with the older 3.5" SATA drives I still keep in storage?

Yes, any 3.5" or 2.5" SATA drive fits the seven target slots and copies at up to 600 MB/s with no capacity limit.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.