Acumen Disc H05-SATA3 1-to-5 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 5
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Acumen Disc
Duplicates seven SATA drives at 600 MB/s with DoD-compliant erase modes
The Acumen Disc H07-SATA3 is a standalone duplicator that copies one source SATA drive to up to seven target drives simultaneously. It operates without a host computer or software, using a four-button controller to select copy or erase functions. The unit accepts both 3.5" and 2.5" SATA hard drives and solid-state drives directly in its slot-loading bays. Power is drawn from a 115-230 V AC supply.
This duplicator suits IT professionals, system integrators and data centres that need to deploy identical drive images or securely sanitise batches of SATA storage. The seven erase modes include DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase. Buyers who require duplication of drives with interfaces other than SATA, or who need network-connected management and logging, will find those features absent.
The maximum data transfer rate is 600 MB/s, equivalent to 36 GB per minute, applied independently to each of the seven target slots. Two copy modes are available: System and Files (Quick Copy) copies only used space, while Whole HDD (Full Copy) duplicates every sector regardless of content. There is no capacity limitation on the source or target drives. This throughput figure determines whether the unit meets your batch-processing time requirements.
| Brand | Acumen Disc |
|---|---|
| Part Number | H07-SATA3 |
| Type | Hard Drive Duplicator |
| Target | 1 to 7 |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 600MB/s |
| Operating Type | Standalone |
| Connector | SATA |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
The unit operates from 115–230 V AC at 50/60 Hz and uses a slot-load design that keeps drives seated while the copy or erase cycle runs.
It accepts 3.5" and 2.5" SATA hard drives and SSDs directly in each slot — no adapter is required for either form factor.
Yes, any 3.5" or 2.5" SATA drive fits the seven target slots and copies at up to 600 MB/s with no capacity limit.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?