Acumen Disc H05-SATA3 1-to-5 SATA Duplicator 600MB/s
- Hard Drive Duplicat…
- 1 to 5
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
Acumen Disc
Duplicates seven SATA drives at 600 MB/s with DoD-compliant erase modes
The Acumen Disc H07-SATA3 is a standalone duplicator that copies one source SATA drive to up to seven target drives simultaneously. It operates without a host computer or software, using a four-button controller to select copy or erase functions. The unit accepts both 3.5" and 2.5" SATA hard drives and solid-state drives directly in its slot-loading bays. Power is drawn from a 115-230 V AC supply.
This duplicator suits IT professionals, system integrators and data centres that need to deploy identical drive images or securely sanitise batches of SATA storage. The seven erase modes include DoD 3-pass and 7-pass patterns compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase. Buyers who require duplication of drives with interfaces other than SATA, or who need network-connected management and logging, will find those features absent.
The maximum data transfer rate is 600 MB/s, equivalent to 36 GB per minute, applied independently to each of the seven target slots. Two copy modes are available: System and Files (Quick Copy) copies only used space, while Whole HDD (Full Copy) duplicates every sector regardless of content. There is no capacity limitation on the source or target drives. This throughput figure determines whether the unit meets your batch-processing time requirements.
| Brand | Acumen Disc |
|---|---|
| Part Number | H07-SATA3 |
| Type | Hard Drive Duplicator |
| Target | 1 to 7 |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 600MB/s |
| Operating Type | Standalone |
| Connector | SATA |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Versi lain model ini
Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.
The unit operates from 115–230 V AC at 50/60 Hz and uses a slot-load design that keeps drives seated while the copy or erase cycle runs.
It accepts 3.5" and 2.5" SATA hard drives and SSDs directly in each slot — no adapter is required for either form factor.
Yes, any 3.5" or 2.5" SATA drive fits the seven target slots and copies at up to 600 MB/s with no capacity limit.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
Tiada bahasa yang sepadan.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?