Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black standalone SATA duplicator with eleven open drive slots and four-button control panel

Acumen Disc

Acumen Disc H11-SATA2 1-to-11 SATA Duplicator 300MB/s

SKU CH-G1AA-G6M0T

Standalone duplicator copies up to 11 SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M

  • TypeHard Drive Duplicator
  • Panel ColorBlack
  • Operating TypeStandalone
  • ConnectorSATA
  • Target1 to 11
  • Buffer Memory128M

Target 1 to 11

Data Transfer Rate 300MB/s

  • Copies up to 11 drives simultaneously at 300 MB/s each
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no host computer or software required

Standalone 1-to-11 SATA duplicator

The Acumen Disc H11-SATA2 copies up to eleven SATA hard drives or solid-state drives simultaneously without a host computer. It accepts both 3.5" and 2.5" drives directly in its slot-load bays and operates from a standard AC supply of 115-230 V at 50/60 Hz. The unit is intended for IT departments, forensic labs and data centres that need secure, high-volume duplication or sanitisation.

Sustained 300 MB/s copy with 128 MB buffer

Each target slot maintains a data transfer rate of 300 MB/s, equivalent to 18 GB per minute, backed by 128 MB of buffer memory and the Athena controller. Two duplication modes are available: System and Files for quick copies, and Whole HDD for sector-by-sector imaging. The buffer smooths throughput during extended multi-drive jobs, preventing bottlenecks when all eleven bays are active.

Slot-load bays, four-button control.

Black slot-load bays hold drives securely without adapters, and a four-button panel navigates all functions. Seven erase modes cover Quick Erase, Full Erase, DoD 3-pass and 7-pass to the 5220.22-M standard, Secure Erase, Enhanced SSD Erase and HPA Erase. The standalone design removes software attack surfaces, while the 1-year parts-and-labour warranty plus lifetime technical support cover long-term service needs.

Ciri-ciri utama

  • Copies up to 11 drives simultaneously at 300 MB/s each
  • Two copy modes: quick file copy or full sector-by-sector duplication
  • Seven erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no host computer or software required

Spesifikasi

BrandAcumen Disc
TypeHard Drive Duplicator
Part NumberH11-SATA2
Panel ColorBlack
Operating TypeStandalone
ConnectorSATA
Target1 to 11
Buffer Memory128M
ControllerAthena Controller
Supported MediaSATA Hard Drive Disk / SATA Solid State Drives
Data Transfer Rate300MB/s
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How loud or hot does the H11-SATA2 get when all 11 slots run at 300 MB/s for hours?

The unit uses a slot-load design with a 128 MB buffer and Athena Controller; no fan noise or thermal figures are published, so plan for normal rack airflow.

What drives or accessories must I already own before the duplicator can copy anything?

You need at least one source and one target SATA 3.5" or 2.5" HDD or SSD; no adapters or host PC are required.

Will the H11-SATA2 duplicator work with the SATA 3 Gb/s drives I already keep in service?

Yes — the duplicator accepts any SATA 3.5" or 2.5" HDD or SSD regardless of link generation, copying sector-by-sector at up to 300 MB/s.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.