Acumen Disc H07-SATA2 1-to-7 SATA Duplicator 300MB/s
- Hard Drive Duplicat…
- 1 to 7
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Acumen Disc
Standalone duplicator copies up to 11 SATA drives at 300 MB/s with seven erase modes including DoD 5220.22-M
The Acumen Disc H11-SATA2 copies up to eleven SATA hard drives or solid-state drives simultaneously without a host computer. It accepts both 3.5" and 2.5" drives directly in its slot-load bays and operates from a standard AC supply of 115-230 V at 50/60 Hz. The unit is intended for IT departments, forensic labs and data centres that need secure, high-volume duplication or sanitisation.
Each target slot maintains a data transfer rate of 300 MB/s, equivalent to 18 GB per minute, backed by 128 MB of buffer memory and the Athena controller. Two duplication modes are available: System and Files for quick copies, and Whole HDD for sector-by-sector imaging. The buffer smooths throughput during extended multi-drive jobs, preventing bottlenecks when all eleven bays are active.
Black slot-load bays hold drives securely without adapters, and a four-button panel navigates all functions. Seven erase modes cover Quick Erase, Full Erase, DoD 3-pass and 7-pass to the 5220.22-M standard, Secure Erase, Enhanced SSD Erase and HPA Erase. The standalone design removes software attack surfaces, while the 1-year parts-and-labour warranty plus lifetime technical support cover long-term service needs.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H11-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 11 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The unit uses a slot-load design with a 128 MB buffer and Athena Controller; no fan noise or thermal figures are published, so plan for normal rack airflow.
You need at least one source and one target SATA 3.5" or 2.5" HDD or SSD; no adapters or host PC are required.
Yes — the duplicator accepts any SATA 3.5" or 2.5" HDD or SSD regardless of link generation, copying sector-by-sector at up to 300 MB/s.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?