Acumen Disc H03-SATA150 1-to-3 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 3
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Acumen Disc
Standalone duplicator copies up to three SATA hard drives or SSDs at 300 MB/s and offers seven DoD-compliant erase modes
The Acumen Disc H03-SATA2 is a standalone duplicator that copies one source SATA drive to three target drives at once. It accepts both 3.5" and 2.5" SATA hard disks and solid-state drives without adapters. Operation requires no host computer or software, so the unit works entirely offline for secure duplication or sanitisation tasks.
Verify that every drive you plan to use has a native SATA connector, because the duplicator only provides SATA slots. The unit draws AC power from a 115-230 V, 50/60 Hz supply, so confirm a compatible mains outlet is available. No host system or driver installation is needed, but ensure the source drive is not write-protected if you intend to copy its full contents.
The black slot-load chassis holds drives vertically for quick insertion and removal during high-volume jobs. An Athena controller with 128M buffer manages transfers at up to 300MB/s across all three target ports simultaneously. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard let you sanitise media to recognised security levels without attaching the drives to a PC.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H03-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 3 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The duplicator includes an adapter for 3.5" SATA drives; 2.5" SATA drives fit the slot directly. No extra hardware or software is required for standalone operation.
System and Files copies only used space for speed; Whole HDD copies every sector including empty areas. Select based on whether you need a bit-for-bit clone or a faster transfer.
Each of the three slots can sustain up to 300MB/s simultaneously, so total throughput scales with the number of drives inserted.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?