Acumen Disc H03-SATA150 1-to-3 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 3
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Acumen Disc
Standalone duplicator copies up to three SATA hard drives or SSDs at 300 MB/s and offers seven DoD-compliant erase modes
The Acumen Disc H03-SATA2 is a standalone duplicator that copies one source SATA drive to three target drives at once. It accepts both 3.5" and 2.5" SATA hard disks and solid-state drives without adapters. Operation requires no host computer or software, so the unit works entirely offline for secure duplication or sanitisation tasks.
Verify that every drive you plan to use has a native SATA connector, because the duplicator only provides SATA slots. The unit draws AC power from a 115-230 V, 50/60 Hz supply, so confirm a compatible mains outlet is available. No host system or driver installation is needed, but ensure the source drive is not write-protected if you intend to copy its full contents.
The black slot-load chassis holds drives vertically for quick insertion and removal during high-volume jobs. An Athena controller with 128M buffer manages transfers at up to 300MB/s across all three target ports simultaneously. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard let you sanitise media to recognised security levels without attaching the drives to a PC.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H03-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 3 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The duplicator includes an adapter for 3.5" SATA drives; 2.5" SATA drives fit the slot directly. No extra hardware or software is required for standalone operation.
System and Files copies only used space for speed; Whole HDD copies every sector including empty areas. Select based on whether you need a bit-for-bit clone or a faster transfer.
Each of the three slots can sustain up to 300MB/s simultaneously, so total throughput scales with the number of drives inserted.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?