Acumen Disc H03-SATA150 1-to-3 SATA Duplicator 150MB/s
- Hard Drive Duplicat…
- 1 to 3
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Acumen Disc
Standalone duplicator copies up to three SATA hard drives or SSDs at 300 MB/s and offers seven DoD-compliant erase modes
The Acumen Disc H03-SATA2 is a standalone duplicator that copies one source SATA drive to three target drives at once. It accepts both 3.5" and 2.5" SATA hard disks and solid-state drives without adapters. Operation requires no host computer or software, so the unit works entirely offline for secure duplication or sanitisation tasks.
Verify that every drive you plan to use has a native SATA connector, because the duplicator only provides SATA slots. The unit draws AC power from a 115-230 V, 50/60 Hz supply, so confirm a compatible mains outlet is available. No host system or driver installation is needed, but ensure the source drive is not write-protected if you intend to copy its full contents.
The black slot-load chassis holds drives vertically for quick insertion and removal during high-volume jobs. An Athena controller with 128M buffer manages transfers at up to 300MB/s across all three target ports simultaneously. Seven erase modes including DoD 3-pass and 7-pass to the 5220.22-M standard let you sanitise media to recognised security levels without attaching the drives to a PC.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Part Number | H03-SATA2 |
| Panel Color | Black |
| Operating Type | Standalone |
| Connector | SATA |
| Target | 1 to 3 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The duplicator includes an adapter for 3.5" SATA drives; 2.5" SATA drives fit the slot directly. No extra hardware or software is required for standalone operation.
System and Files copies only used space for speed; Whole HDD copies every sector including empty areas. Select based on whether you need a bit-for-bit clone or a faster transfer.
Each of the three slots can sustain up to 300MB/s simultaneously, so total throughput scales with the number of drives inserted.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?